| 7000 UCHD |
| DIGITAL SATELLITE RECEIVER with PVR |
| The AnySat 7000 UCHD Set-Top-Box is a highly advanced PVR-ready DVB-S Digital Satellite Receiver. Record any program you wish as easily as it gets, and with the highest quality! Using the Timeshift function, you can even watch any channel while recording another. This box comes either "PVR-ready" without a pre-mounted hard drive or with a included 40GB hard drive. The Seca-compatible Smartcard Reader combined with two separate Common Interface Slots provide a previously unknown range of flexibilty for watching Pay-TV. The Digital Audio-Output brings movie-theater-like sound to your living room by providing 5.1 channel Digital Audio and more. |
| |
| FEATURES |
- DVB-S Digital Satellite Receiver
- PVR-ready for recording digitally on hard-drive
- Prepared for easy hard drive installation by user
- With optional 40GB hard drive premounted
- Compatible with any standard ATA hard drive
- Timeshift Recording
- Seca-compatible embedded UCAS with Smartcard Reader
- 2 x Common Interface slots for Pay-TV channels
- Easy installation for dish antenna
- Plug & Play
- User-friendly OSD menu
- Very Powerful Electronic Program Guide
- Easy-edit , easy-access Bouquet/Favorite channels
- 4000 channels programmable for TV & Radio
- DiSEqC 1.2
- USALS automatic satellite positioning system
- OTA software update via ASTRA
- Multi-satellite search function
- Multi-event timer function
- Teletext function
- RS-232 serial link (software updates, channel editing with your pc)
- RGB(Scart) and optional S-Video Output
- variable TV-screen format ratio (4:3, 16:9)
- Channel Edit function(TV/Radio)
- SCPC/MCPC receivable from C/Ku-band satellites
- Last channel memory
- Parental lock
- AC power switch
- RF modulator ch 21-69 PLL
- Digital Audio Output (coax.) for 5.1 channel sound
- Analog Audio/Video Output (Cinch)
- Easy to use Remote Control Unit
|
Technical Specifications
Model No. : AnySat 7000 UCHD
• Hard Drive (optional)
– Capacity : 40GByte (up to 120 GBytes)
– Type : IDE, 5400 rpm
• Smartcard Reader
– 1 x Seca-compatible
• Conditional Access Interface
– PCMCIA : 2 x DVB Common Interface Standard
• IF Section
– Input Frequency : 950~2150MHz
– Input Connector : F-Type, IEC 169-24, Female
– Input impedance : 75O
– Input Level : -25~-65dBm
– LNB Power : 14/18Vdc±5%
– Current : 500mA Max Overload Protection
– 22KHz Tone : 22KHz±4KHz, 0.6Vp-p±0.2Vp-p
– DiSEqC : Ver 1 .2
– USALS
• Demodulator Section
– Demodulation :QPSK
– Symbol Rate :2~45Mbaud(SCPC/MCPC)
• Video Section
– Decoding : MPEG-II
– Output : NTSC/PAL(Auto)
– Aspect Ratio : 16:9, 4:3
– Resolution : 720x480(NTSC)/720x576(PAL)
– Output Level : 1Vp-p/75O
– Output Connector : TV Scart, Video Scart, RCA/Cinch
– RF Modulator : Channel 21 ~ 69
• Audio Section
– Decoding : MPEG-I, Layer 2
– Bit Rate : Max. 384Kbps
– Output Level : 0 dBm
– Output Impedance : 600O Unbalanced
– Output Connector : RCA/Cinch, TV Scart, Video Scart
– Digital Output(S/PDIF) : RCA/Cinch
• Serial Data Interface
– Connector : 9pin D-sub
– Signals : RS232, 115.2Kbps
• Front Panel
– Standby, CH up/down , VOL up/down, MENU, OK
|
