|
General information |
Connectivity |
|
High Definition and Standard Definition compatible |
1 x USB2.0 High Speed Host port |
|
PVR ready over external USB drive |
1 x 10/100Mbps Ethernet port, RJ45 |
|
Deep standby low power mode |
RS232C: Transfer rate 115,200 bps |
|
CI slots: 1, DVB-CI compliant |
|
|
CA slots: 1 (Conax – optional) |
Rear panel Interfaces |
|
Number of channels: 6000 |
Front-End: Input connector: IEC169-2, Socket (F-connector for Satellite front end) Loop Through Output connector: IEC169-2, Plug |
|
Number of favorite list: 8 |
TV SCART connector: CVBS (input & output), RGB/YUV (output) L&R Audio (input & output) S-Video (output) Fast Blanking (output) Slow Blanking (output) |
|
EPG: up to 7-days based on SI information |
VCR SCART connector: CVBS (input & output), RGB (input) L&R Audio (input & output) S-Video (output) |
|
JPEG and MP3 decoding |
Digital Audio SPDIF: 1 * Coaxial, 1 * Optical |
| |
CINCH (RCA): Audio – L&R |
|
Satellite Front-End |
YPbPr (component video) |
|
Modulation: DVB-S/S2 |
HDMI |
|
Input connector: F-connector (with Loop-through) |
USB host socket (Type A) |
|
Frequency range: 950-2150 MHz |
Serial Port: RS-232C (Female, DB-9) |
|
Symbol rate range: 1-45 MSym/s |
|
|
Input level: - 25 to - 65 dBm |
Front panel |
|
LNB voltage: 13/18V max 400 mA |
Standby, Channel Up/Down, Exit, Menu and navigation keys |
|
Tone control: 22 kHz |
8 digit VFD display |
|
DiSEqC: 1.1, 1.2, USALS, Unicable™ |
1 Standby LED Indicator |
| |
1 IR Sensor |
|
Video decoding |
1 CI , 1 Smart Card slots |
|
Data speed MPEG2 MP@HL, MP@ML, MPEG4 AVC high profile level 4.1 |
|
|
Max resolution 1920 x 1080 |
Accessories |
|
Supported resolutions: 576i/p over CVBS video and SCART connectors 576i/p,720p,1080i over HDMI and Component video connectors |
User manual: English, German. |
|
Standard PAL |
Remote Control unit with 2 batteries |
|
Aspect ratio: 4:3 and 16:9, Automatic adjustment for 16:9 TV sets, Letter Box supported |
2 x AAA batteries |
|
|
A/V Cable: 1 SCART to SCART cable (option) 1 HDMI cable (option) |
|
Audio decoding |
|
|
Mono, Dual channel, Stereo, Joint Stereo, MPEG1, MPEG2, mp3 |
|
|
Digital Audio - via S/PDIF interface (coaxial and optical): Dolby Digital passthrough PCM data output |
|
|
|
|
| Regulatory compliance |
|
|
Compliant to CE:
89/336/EEC (EMC)
73/23/EEC (low voltage directive) |
|
|
ROHS compliant |
|
| |
|
|
Power requirements |
|
| Mains input voltage: 230V~ |
|
|
Mains input frequency: 50 / 60 Hz |
|
|
Power consumption: Max: 30W |
|
| Deep standby mode – less than 1Watt |
|
|
|
|
|
Physical Specification |
|
| Size (W * H * D): 260mm * 45mm * 213mm |
|
|
Operating temperature: +5°C to +35°C |
|
|
Storage temperature: -20°C to +60°C |